Back to blogDaily Operations

Pallet Network Haulage: Records Every Member Depot Should Keep

What the pallet network system covers and what stays with the member depot: trunk drivers' hours, hub trailer swaps, curtainsider loading, claim evidence and a daily routine.

7 min readPublished 17 November 2026Updated 6 November 2026Alex Matei

Running a depot inside a pallet network means living on two clocks. During the day your rigids collect freight across your postcode area and deliver what came in overnight. In the evening the trunk leaves for the hub, swaps trailers and comes back with tomorrow's deliveries. Miss the trunk cut-off and a whole day's collections sit in your yard. Run a trunk driver short on rest and the problem lands on your operator licence, not the network's.

This guide is for pallet network haulage members, and for hauliers thinking of joining one, who want to get their own records in order. The network's system tracks consignments; it does not keep your walkaround checks, your trunk driver's hours, your trailer swaps or the evidence behind a claim. Here is what a member depot needs to record, day and night, and where a general haulage system fits alongside the network's tools.

How pallet network haulage works for a member depot

Each network has its own rules, timetables and charging, set out in the membership agreement, so check yours rather than relying on a general description. The usual pattern is that a member collects pallets from customers in its area, labels and scans them into the network's system, and trunks them overnight to a hub. At the hub, freight is sorted by destination and the member returns with pallets for delivery in its own area the next day.

That gives a member three distinct types of work: local collections, local deliveries, and the trunk. Each has different risks. Collections and deliveries are multi-drop work on rigids, often with tail lifts and pallet trucks at sites with no forklift. The trunk is night driving, usually on an artic, with a trailer change at a busy hub.

What the network system covers, and what it leaves with you

Network systems are built around the consignment: barcodes, scans, hub sorting, delivery status and the customer-facing tracking. They are good at answering "where is pallet 3 of 4?". They are not built to run your licence.

AreaUsually in the network systemStays with the member
Consignment labels, scans and trackingYesCheck your own scans are complete before the trunk leaves
Delivery status and network PODYes, under the network's processYour own photos of damage or shortage at the time
Driver walkaround and nil-defect recordsNoYes, every vehicle and trailer driven
Trunk driver's hours and restNoYes, under the drivers' hours rules
Which trailer came back from the hubSometimesYes, with a check before it moves
Tail-lift and equipment checksNoYes
Maintenance and inspection recordsNoYes

The right-hand column is what DVSA and the traffic commissioner look at. GOV.UK guidance for goods vehicle operators says drivers must do a walkaround check before driving a vehicle for the first time each day, and that safety inspection and maintenance records must be kept for at least 15 months. Membership of a network does not change either.

Trunking: drivers' hours, trailer swaps and the hub

The trunk is where small members carry the most risk. A driver who has done a day on the yard or a collection run and then takes the trunk can easily run out of hours. Under the EU and assimilated drivers' hours rules, daily driving is limited to 9 hours, extendable to 10 hours twice a week, with breaks totalling at least 45 minutes after no more than 4 hours 30 minutes of driving and at least 11 hours of daily rest, which can be reduced to 9 hours three times between weekly rests. Plan the trunk as a job with its own driver allocation, not as something tacked on to the end of a day.

At the hub, your driver drops one trailer and picks up another, often one they have never seen. That trailer needs a walkaround check before it moves, recorded against the trailer number. Our guide to the trailer swap walkaround check workflow sets out a routine that works at a busy changeover point. If the inbound trailer has a defect, the driver needs a clear instruction on who to tell at the hub and in your office, and the record needs to show what happened next.

Loading curtainsiders with mixed pallet freight

Network freight is mixed by nature: different heights, weights and wrapping quality on the same trailer. DVSA's guidance on loading different HGVs says the superstructure of a standard curtainsider is not designed to secure the load, and anything attached to it, such as buckle straps, can only be used for loads up to 400kg. Trailers built to the XL standard can do more, but only when the load fills the space within the tolerances DVSA sets out, which mixed network freight often does not.

For a member depot that means two practical rules. Collection drivers need straps and the time to use them on part loads. And the trunk trailer you load at night should be planned around load security as well as the cut-off.

Collections and deliveries: evidence that protects your margin

Network economics are tight, and claims for damage or shortage can wipe out the margin on a pallet. The member who collected, the hub and the delivering member each handled the freight, so the claim often turns on who has evidence from their part of the journey.

Simple rules help. Photograph any pallet that looks damaged or badly wrapped at collection, before it goes on your vehicle. Record any refusal or shortage at delivery at the door, with photos and a note of what the consignee said. The detail is in our guide to pallet delivery discrepancy records. Tail-lift deliveries add their own equipment checks and examination records.

A member depot's daily routine

Morning

  1. Confirm every vehicle and trailer used has a completed walkaround check, including the trailer the trunk brought back.
  2. Review defects reported overnight and decide whether each vehicle can go out.
  3. Allocate delivery runs and note any pallets that arrived damaged off the trunk, with photos.

Afternoon

  1. Chase missing collection evidence before the freight is loaded for the trunk.
  2. Check the trunk driver's available hours and rest before confirming the allocation.

Evening

  1. Confirm the trunk left on time and with which trailer.
  2. Note anything the night shift needs to know: a defect, a late collection, a customer complaint.

Frequently asked questions

Does the pallet network check my drivers' hours or walkaround checks?

Check your membership agreement, but do not assume so. Networks run consignment tracking and their own service standards. Drivers' hours, walkaround checks and maintenance records remain the operator's responsibility under the operator licence.

Can I use the network's proof of delivery as my only evidence?

It is the network's record of the consignment and you should follow its process. Keeping your own photos of damage or shortage at collection and delivery gives you evidence if a claim comes back to your depot.

Who checks a trailer collected from the hub?

Your driver, before it moves, if your vehicle is pulling it. Record the trailer number with the check so you can show which trailer was checked and when.

Where HauliK fits

HauliK does not connect to pallet network systems, print network labels or read consignment scans. Members keep using the network's tools for that. HauliK holds the depot's own side: walkaround, coupling and load-security checks with photos and defects, a trailer register, and on the Fleet plan, jobs and multi-stop journeys for collection and delivery runs and the trunk, with the driver, vehicle and trailer assigned. Timesheets give advisory rest warnings, and the driver app captures photos and signatures on each drop.

If your depot runs on the network system for freight and a mix of paper and spreadsheets for everything else, try HauliK on your own vehicles. See what each plan includes; the 14-day free trial needs no card.

Note: This article is general information for UK transport operators, not legal or compliance advice. Requirements may change. Always check the latest DVSA guidance and confirm with your transport manager or compliance adviser.

Connect the working day

Run haulage operations and records in one system

HauliK connects checks, defects, jobs, proof of delivery and fleet records for UK transport operators.