Back to blogDriver Compliance

HGV Driver Induction Checklist for New Employed Drivers

A practical induction routine for new employed HGV drivers: right to work, DVLA licence, Driver CPC and tacho card checks, day one, vehicle familiarisation, app setup and the first week.

7 min readPublished 19 November 2026Updated 6 November 2026Alex Matei

A new employed driver is a long-term investment, and the first week sets the tone for how they will treat your checks, your vehicles and your customers. Yet many small operators still induct drivers the same way they brief an agency driver for one shift: show them the truck, hand over the keys, point them at the first drop. An HGV driver induction checklist turns that into a repeatable routine that covers the legal checks, the company rules and the practical knowledge a driver needs before working alone.

This guide is for employed drivers joining your payroll. It sets out what to check before day one, what to cover on the first day, how to handle vehicle familiarisation and app setup, and what the first week should look like. Agency drivers need a shorter, shift-based routine, which is covered in our agency HGV driver onboarding checklist.

What checks must you do before a new HGV driver starts?

Do these before the start date, not on the morning. If anything fails, you want to know while there is still time to delay the start.

Right to work. GOV.UK says you must check a job applicant's right to work before you employ them, record the date of the check, and keep copies of the documents during employment and for 2 years after they leave.

Driving licence. Ask the driver to generate a check code through the GOV.UK view or share your driving licence service. They need their licence number, National Insurance number and the postcode on their licence. You then use the check driving information service with the last 8 characters of their licence number and the code, with their permission. A code lasts 21 days and works once. The check shows which vehicles they can drive, any penalty points and any disqualifications. Our guide to driver licence checks for fleet managers covers how often to repeat them.

Driver CPC. Drivers of lorries must complete 35 hours of periodic training every 5 years to keep their Driver CPC, and driving professionally without it can bring a fine of up to £1,000, according to GOV.UK's Driver CPC training page. See the Driver CPC card and record its expiry date. If you run work into Europe, check whether the driver holds a National Driver CPC, which does not allow professional driving in Europe.

Tachograph card. See the driver's digital tachograph card and record its number and expiry. Drivers can renew when the card expires within 90 days, and a lost, stolen or faulty card must be reported to DVLA immediately with a replacement applied for within 7 days, per the GOV.UK driver tachograph card page.

Medical and declarations. Note the licence expiry date for the vocational categories, which drives the medical renewal cycle, and ask the driver to declare any condition or medication that could affect their driving.

Previous employment. References that confirm the type of work, and the driver's own account of any incidents or convictions in recent years.

The pre-start checklist

Use this as the office checklist before the driver's first shift:

ItemEvidence to keepDone
Right to work checkedCopy of documents, date of check
Licence checked via DVLACheck date, categories, points
Driver CPC card seenCard copy, expiry date
Tachograph card seenCard number, expiry date
Licence and medical expiry recordedDates in driver record
Contract and handbook issuedSigned copy
Emergency contact recordedName and number
Company policies signedDrugs and alcohol, mobile phones, data protection
PPE issuedList of items and sizes
Driver app account createdLogin sent

What to cover on day one

Day one is mostly office and yard, not road. Plan at least half a day before the driver drives your vehicle on their own.

  • Company rules. Reporting times, how to report sickness, who to call out of hours, and the policies they have signed. Go through the mobile phone rule and the alcohol rule in person rather than leaving them in the handbook.
  • Drivers' hours and working time. How you expect hours to be recorded, how breaks fit the work, and who to tell when a job will push them over. Our working time, POA and breaks explainer is a good handout.
  • Tachograph routine. Card insertion at the start of the shift, manual entries, and your card download schedule.
  • Defect reporting. What a defect is, how to grade and report it, what happens to a vehicle marked off road, and the rule that a driver never drives a vehicle they believe is unsafe.
  • Site safety. Yard layout, speed limits, walkways, reversing rules, coupling area, fuel bunker and where the key cabinet is.

Vehicle familiarisation

Every truck has its quirks. Even an experienced driver needs time with your specific vehicles and trailers before running alone.

  1. Full walkaround check with a trainer or senior driver, using your actual check process.
  2. Cab controls: retarder, gearbox modes, lights, mirrors and camera settings, warning lights.
  3. Coupling and uncoupling the trailer types they will pull, including the tug test and the checks after coupling.
  4. Load-securing equipment: straps, bars, curtains, and how you expect loads to be secured and photographed.
  5. Vehicle height and the bridge height notice in the cab.
  6. A short accompanied drive on local roads before any customer work.

Record who did the familiarisation, on which vehicle, and when. If the driver later has a coupling incident, that record matters.

Setting up the driver app

If you use a driver app, set it up during induction, not by text message later. Install it on the driver's device, log in together and walk through:

  • a real walkaround check on the vehicle they will use
  • reporting a defect with a photo
  • opening a job, updating a stop and capturing proof of delivery
  • reading and replying to a message from the office

Make one rule clear from the start: the app is used only when the vehicle is safely parked. Checks happen in the yard before moving, job updates and POD at the stop, messages at the next break.

The first week

*Example (fictional) first week for a new driver at a 15-truck general haulage operator:*

DayPlan
MondayPre-start checks confirmed, office induction, yard and vehicle familiarisation, accompanied local drive
TuesdayRide-along with a senior driver on a regular multi-drop run
WednesdayDrives the same run with the senior driver alongside
ThursdayFirst solo run on a simple route, planner phones at each planned break
FridaySolo run, end-of-week review with the transport manager

At the Friday review, look at their checks, any defects reported, POD quality and timesheet. Ask what was unclear. Sign the induction record together and set a 4-week follow-up.

Frequently asked questions

How do I check a new HGV driver's licence?

Ask the driver for a check code from the GOV.UK licence service, then use the check driving information service with the last 8 characters of their licence number. The code lasts 21 days and works once.

What documents should a new HGV driver bring on day one?

Their photocard licence, Driver CPC card, digital tachograph card and right to work documents. Ideally you have seen and recorded all of these before the start date.

How long should an HGV driver induction take?

Plan at least half a day before solo driving, and a structured first week before the driver runs all types of work alone. Experienced drivers still need time on your vehicles, sites and systems.

Should I keep induction records?

Yes. A signed induction record showing what was covered, by whom and when is useful evidence for audits, insurers and any later incident investigation.

Where HauliK fits

HauliK keeps the dates you record at induction in one driver record: licence and CPC/DQC expiry dates with alerts before they lapse, documents stored against the driver, and assignment warnings when a driver's compliance has expired. The driver app gives a new driver one place for checks, defects, jobs, POD and messages, used only when safely parked. You can see the compliance side on the O-licence compliance page.

Plans start from one vehicle and include up to three employed drivers per vehicle, with agency drivers unlimited. A 14-day free trial with no card needed is enough to induct your next new starter through it.

Note: This article is general information for UK transport operators, not legal or compliance advice. Requirements may change. Always check the latest DVSA guidance and confirm with your transport manager or compliance adviser.

Connect the working day

Run haulage operations and records in one system

HauliK connects checks, defects, jobs, proof of delivery and fleet records for UK transport operators.